Replacing a garage door can cost a lot of money than repairing or maintaining it. So, it can be a big headache if your garage door is not functioning as it was. And you are not in a position to diagnose a cause behind the malfunctioning garage door. It is wise to check the garage door and try to troubleshoot the problems before calling a pro. Click on the link https://garagedoorrepairatlantaga.com/ to learn more if you are looking to take such important decisions.
Inspect the garage door
The first action that you should take is to find out the external problems. You would be shocked at how many issues can be caused by the simple parts becoming lodged at any point.
Clean up the garage door
Normally, a thick layer of dirt and hard wax accumulates on the tracks and rollers of the garage door. These parts should be cleaned and lubricated to make them working again because the friction generated by the springs might cause the garage door to become jammed. You can use the ordinary household cleaning substance or mild dishwasher to clean the garage door. After washing the garage door roller, tracks, and panels make sure you dry everything completely.
Lubricate the garage door
Sometimes the garage door does not perform well because its moving parts are not maintained and lubricated properly. You should perform lubrication occasionally to make them working enough. You can use powdered graphite or any lubrication oil to grease the rollers and tracks. Be careful and avoid applying anything on the plastic bearings of a garage door.
Inspect garage door springs
Garage door springs and cables should be checked to avoid any unhappy incident. Garage door extension springs are those that are mounted on either side of the garage door, moving along the pulleys. While garage door torsion springs are found at the top of the garage door. Check them carefully to ensure that they are not rusted or worn out. If you found any problem, you will have to call a local garage door professional to determine whether they just need maintenance or to be replaced. Remember, garage door springs should be replaced in pairs to avoid an imbalance garage door. Garage door torsion springs are complicated and dangerous to handle, so it is wise to hire a professional technician to do this job.
Tighten up the loose parts
Like other mechanical equipment, the garage door has a trend to be wear and tear with the passage of time. Hinges, bolts, and screws may become loose since the garage door is used frequently. You should check all the blots and screws working in the garage door operations. Some problems can be solved by just tightening up the loose brackets. If they are not tightened due to the loose holes, you may use small pieces of wood to fill the holes. In the case of sagging hinges, you should adjust or replace them, if needed.
Check the garage door tracks
If you have a metal garage door then check its tracks to find out any dent or bump. Garage door tracks work with the rollers that is why they are essential units in the operations of the garage door. You should check the alignment of garage door tracks and sensor as well and tap the dented area to get them back into the right position.
Garage doors are made from plastic, metal, and wood martial. They are operated with different mechanisms ranging from complex to simple. If they show some problems, you can use the above checklist to find out what is wrong. If you are not a handyman, call a reputed and register garage door Repair Company to fix your garage door.